Keithley 4200-SCS Startup Guide

Model 4200-SCS Startup Guide
PA-716 Rev. C / 11-03 1
Start Here! It’s easy... Step 1 Unpack your Keithley 4200-SCS
Step 2 System connections – Power cord, keyboard, and printer (optional)
Step 3 Connect DUT test fixture to 4200-SCS
Step 4 Power-up & log-in
Step 5 Start KITE, open the “default” project, and select the “vds-id” test
Step 6 Test definition
Step 7 Run “vds-id” test
Step 8 View data sheet
Step 9 View graph
Step 10 Printing and exporting data
This Startup Guide selects the “default” project and runs the “vds-id” test. If you wish to select a different
project and/or test, you must modify the procedures accordingly. Figure 1 shows how the KITE window
will look after the “default” project and “vds-id” test is selected.
Figure 1: KITE interface (“default” project shown with “vds-id” test selected)
Project Navigator Selected Test Toolbar KITE Workspace
Message Area

Keithley 4200-SCS Specifications

General

Brand	Keithley
Model	4200-SCS
Category	Semiconductors
Language	English