KELISS T162A Series - User Manual

Questions and Answers

S
snyderbarryAug 12, 2025
What to do if my KELISS Toilet doesn't flush?
- C
  Connie MyersAug 12, 2025
  If your KELISS Toilet isn't flushing, even when you press the button, there could be several reasons. First, if the wand is extended but no water is coming out and the water pressure is weak, there may be a water failure; press the stop button and wait. Ensure the water supply valve is open by turning on the tee valve. Check the water filter drain valve for clogs and clean or replace the filter if necessary. Also, check if the water temperature setting is low and adjust it using the remote control. Finally, the seat sensor may not be detecting your sitting posture correctly, so try sitting back on the toilet seat.
D
desiree41Aug 16, 2025
Why is my KELISS Toilet not working?
- B
  Brian LeeAug 16, 2025
  If your KELISS Toilet is not working, start by checking if it's properly plugged into a power socket; if not, insert the plug or try a different socket. If there's a power failure, wait for the power to be restored. Also, verify that the leakage protector is connected. If it has disconnected, insert the plug into the power socket and press the reset button on the plug.
C
Chris FoxAug 19, 2025
How to fix low water pressure on my KELISS Toilet?
- D
  Daniel HernandezAug 19, 2025
  If you're experiencing low water pressure during rear or bidet wash with your KELISS Toilet, the filtration screen of the inlet angle valve may be blocked; try cleaning or replacing the filter. Additionally, check the water-inflow hose for any leaks and tighten it if necessary.
P
Patricia PetersonAug 23, 2025
Why is my KELISS Toilet seat not heating up?
- A
  alexander93Aug 23, 2025
  If the seat on your KELISS Toilet isn't getting warm, it could be due to a couple of reasons. The seat sensor may not be properly detecting your sitting posture, so try sitting back on the toilet seat. Also, the toilet seat temperature may be set to a low level; use the remote control to adjust the seat temperature.
S
stevenbrownAug 27, 2025
How to improve the deodorization of my KELISS Toilet?
- R
  Ryan DavisAug 27, 2025
  If the deodorization effect of your KELISS Toilet isn't obvious, first ensure the seat sensor is detecting someone sitting; sit back on the seat sensor detection position. If that doesn't work, the activated carbon filter block or spacer may be blocked. Remove the deodorizing window to clean or replace the activated carbon filter.
R
Rachel FrazierAug 31, 2025
Why does the nozzle stop suddenly on my KELISS Toilet?
- A
  Antonio YoungAug 31, 2025
  If the nozzle on your KELISS Toilet stops cleaning suddenly, it might be because the seat sensor didn't detect you. If you move too fast or leave the seat, the seat sensor cannot detect you in short time. Sit back on the seat sensor detection position, then start the relevant button.
S
Shane SmithSep 3, 2025
What to do if water comes out unexpectedly from the wand of my KELISS Toilet?
- C
  Caroline ButlerSep 3, 2025
  If water unexpectedly comes out from the wand of your KELISS Toilet, it could be due to an abnormal operation. Disconnect the power plug and wait about 1 minute before inserting it again.
C
clementsmarieSep 7, 2025
What to do if water leaks from the inlet hose of my KELISS Toilet?
- N
  Nathan TorresSep 7, 2025
  If water is unexpectedly coming out from the inlet hose of your KELISS Toilet, the inlet hose may be damaged. Replace the inlet hose.

Summary

Safety Precautions

Symbols and Meanings

Explains warning symbols like "WARNING", "Prohibited", and "Caution".

General Warnings

Lists immediate actions for hazards like smoke, leaks, or damage, and general prohibitions.

User and Environmental Cautions

Provides safety advice on ventilation, power, sunlight, special users, water types, and children.

Components

Specifications

Functions Introduction

Parts Name

Product Drawings

Power and Water Connection Tip

Installation Precaution

Product Installation

Water Inlet Valve and Ceramic Marking

Guides on installing the water inlet valve and marking the toilet's ceramic curve.

Method 1: Toilet Installation Steps

Details sealing ring and ceramic toilet installation steps for Method 1.

Method 2: Bidet Seat & Sealing Ring Installation

Covers removing the bidet seat and sealing ring installation for Method 2.

Method 2: Ceramic and Bidet Seat Attachment

Details ceramic installation with glass cement and securing flange bolts, then bidet seat attachment.

Water, Power Connections & First Use

Guides on water inlet connection, power hookup, and initial product testing.

Instructions for Remote Control Installation

Method 1: Adhesive Mounting

Details installing the fixing panel using double-sided tape on smooth surfaces.

Method 2: Screw Mounting

Guides drilling holes, using expansion plugs, and securing the fixing panel with screws.

Remote Control Panel Overview

Using Instructions

Basic Functions: Stop, Rear, Bidet

Explains the basic functions of stopping, rear spray, and bidet spray.

Adjusting Water, Temperature, and Nozzle

Details how to adjust water flow, temperature, and nozzle position.

Seat Heating, Massage, and Swing

Explains seat heating adjustment, massage modes, and the swing function.

Flush, Dry, Personal Settings, and ECO

Guides on flushing, drying, saving personal preferences, and energy saving.

Lid;Seat Control and Combination Functions

Details automatic lid/seat operation and combined function key operations.

Knob Function Description

Sitting Operations

Describes knob functions for bidet, rear wash, nozzle position, stop, drying, and flush while sitting.

Not Sitting Operations

Explains knob functions for flushing and indicator control when not sitting.

Foot Sensing

Details how to use foot sensing for lid/seat opening and flushing.

Cleaning

Lid and Seat Maintenance

Provides instructions for cleaning the lid and seat using soft cloths and specific cleaners.

Bowl Maintenance

Guides on cleaning the toilet bowl using a brush and appropriate detergents, avoiding harsh chemicals.

Cleaning the Water Filter

Step-by-step guide on how to remove, clean, and reinstall the water filter.

Measures for Special Cases

Power Interruption Flushing

Explains how to use a power bank via USB-C for flushing during power outages.

Water Interruption Flushing

Provides steps for manual flushing and adding water to avoid stink during water supply issues.

Long-Term Idle Status Maintenance

Guides on disconnecting power and draining water for extended periods of non-use.

Troubleshooting Common Issues

Product Not Working & Water Pressure Problems

Addresses issues like power, water supply, weak pressure, and nozzle problems.

Nozzle Stops & Low Water Pressure Causes

Covers sudden nozzle stops due to seat sensor and low pressure from filter/hose issues.

Deodorization, Unexpected Water & Sensor Issues

Explains deodorizer behavior, unexpected water, and seat sensor detection problems.

Drying, Flushing, Remote Control & Unit Stability

Troubleshoots drying, flushing, remote control, unit stability, and plumbing leaks.

Maintenance Service Sheet

KELISS T162A Series Specifications

General

Brand	KELISS
Model	T162A Series
Category	Toilets
Language	English