How to fix Kellfri 35-VKM195H Farm Equipment that cuts unevenly?
If the flail mower is cutting unevenly or poorly, make sure the flails are intact and mounted properly. You should also adjust the support roller and make sure it is positioned correctly, then check and tighten any belt.
General| Brand | Kellfri |
|---|---|
| Model | 35-VKM195H |
| Category | Farm Equipment |
| Language | English |
Details about the flail mower's features, hydraulic side shift, working width, and technical data.
Crucial instructions for safe operation and who should not use the equipment.
Explains the meaning of danger, warning, and careful symbols for hazard identification.
Guidance on appropriate clothing, footwear, hearing protection, goggles, and gloves.
Key warnings about PTO shaft, rotating parts, maintenance, and operation safety.
Recommendations for suitable clothing, footwear, and securing long hair.
Advice on clearing the area, checking for electrical wires, and working on slopes.
Information on emergency numbers and ensuring access to first aid and fire extinguishers.
Essential checks before operating, including manual understanding and visual inspection.
Rules for operator position and actions when leaving the tractor.
Instructions and warnings regarding PTO shaft protection, guards, and anchoring.
Identifies crushing points, trapping risks, and dangers from rotating blades.
Details the hazard of thrown objects and the required 15m danger zone.
Advises on noise levels and the necessity of hearing protection during operation.
Instructions on keeping warning labels visible, clean, and replacing them if worn.
Detailed explanation of various warning symbols and their meanings for safety.
Indicates that the equipment is CE-marked, signifying conformity with EU standards.
Emphasizes checking and tightening bolts and adjusting belt tension for machine integrity.
Instructions to check flails, protective covers, and remove transport locking devices.
Steps for attaching the mower to the tractor and connecting PTO and hydraulics.
Guidance on checking the area, speed, cutting wet/high grass, and lowering the unit.
Recommendations for operating speed, RPM, and checking cutting unit alignment.
Warnings against sharp turns and driving backwards when the machine is sunk.
Prohibits PTO connection when raised and emphasizes rotor stop before lifting.
Emphasizes stability, replacing worn parts, and using genuine spares for longevity.
Instructions for correct disposal of the product and contacting local authorities.
Details recommended service intervals for flails, gearbox, rotor, belt, and lubrication.
Lists common errors like uneven cutting, noise, vibrations, and hydraulic problems with measures.
Warns about skin penetration from pressurized fluids and safe leak checking methods.
Identifies gearbox components and the importance of checking oil and grease levels.
Explains how to check belt tension by measuring deflection under pressure.
Details releasing bolts and adjusting the bolt to achieve proper belt tightness.
Emphasizes retightening belts after 2 hours of operation, especially for new machines.
Identifies grease fitting for refilling, specifying amount and oil type for the gearbox.
Advises regular lubrication, after rinsing, and avoiding over-lubrication to prevent wear.
Identifies major assembly parts like the 3-point bracket, cylinder, hoses, and guards.
Provides an exploded view of the three-point hitch mechanism with numbered parts.
Lists parts for Drawing 1, including designation and quantity for each component.
Shows an exploded view of the mower deck, drive system, and related components.
Lists parts for Drawing 2, including designation and quantity for each component.
Lists bolts, nuts, washers, and rectangular shaped washers included in the assembly kit.
Provides a form and instructions for submitting complaints, including contact details.
Details the warranty period, what it covers, and exclusions like labour and wear parts.
States compliance with EU Machinery Directive 2006/42/EC for the machine.
Information on providing feedback, product development, and customer service contact details.
To Next Page