Table of contents
INTRODUCTION
Thank you for choosing a product from Kellfri AB. By following general safety information,
operating instructions and common sense, you will have many years of enjoyable use of the
product. Kellfris equipment and products are aimed to be use by active farmers with high
demands on functionality.
PRODUCT INFORMATION
Flexible ail mower with hydraulic side shift adjustment
• 35 cm hydraulic side shift adjustment
• 195 cm working width
• 32 forged hammer ails
• Adjustable supporting roller at rear
• Wear skids on sides
Kellfri’s VKM195H ail mower is designed to quickly manage everything from cutting/topping
of grassland, clearing overgrown land with saplings to slashing straw stubble.
The 1.95 metre working width ensures a top clearing speed per hour. The fast rotation speed
and the weight from the 32 forged hammer ails ensure the machine can very easily cut and
hack all types of materials; ts tractors with between 40 and 50 hp.
The machine is only intended for cutting and topping of grassland. Clean the cutting area from
objects such as stones, branches, etc. before starting the operation. The machine dened as
single purpose equipment.
TECHNICAL SPECIFICATION 35-VK195H
Working width 195 cm
Weight 350 kg
Flails 32 Hammer ails
Power requirements 40-50 hp
Driving speed of the tractor 6-12km/h
Gearbox: oil type Transmission oil 80W-90 (1L)
RPM 540
PTO Shaft Standard
To Next Page