To Next PageTo Next Page
Need help?Do you have a question about the Kelvinator KCBM48FS and is the answer not in the manual?
Record appliance model and serial number from the unit's serial plate for reference.
Fill out and return the product registration card for warranty and service purposes.
Covers safe use of outlets, avoiding extension cords, proper grounding, and unplugging procedures.
Lists actions to avoid, such as unauthorized repairs or storing flammables inside the unit.
Recommendations for placing the unit on stable surfaces in well-ventilated, indoor areas, away from heat.
Details on ensuring proper voltage, grounded outlets, and dedicated circuits for the appliance.
Allow 24 hours for the appliance to reach optimal cooling before loading food.
Instructions on adjusting the temperature control after initial operation and stabilization.
Explanation of the automatic defrost cycle and how to set the defrost timer.
Steps for cleaning the inside of the appliance using warm water and baking soda solution.
Guidelines for cleaning the appliance exterior with mild detergent and water.
Information about the condensate pan and why it should not be removed.
Advice on loading food, ensuring proper air circulation to maintain performance.
Guidance on maintaining optimal operating conditions and ambient temperature for efficiency.
Instructions for periods of non-use and safe procedures for moving the appliance.
Overview of the world-known brand SCM temperature controller, its reliability, and ease of operation.
Lists key functionalities like temperature display, control, fan operation, and defrost.
Details on power supply, temperature ranges, sensor type, and contact capacities.
Explanation of what each LED (Refrigerant, Constant Temp, Delay, Defrost, Fan) indicates.
Instructions for setting temperature, manual defrost, and displaying evaporator temperature.
Guidance on entering password, checking/adjusting parameters, and changing menu password.
Explains compressor operation based on set temperature and hysteresis, including safety cut-offs.
Details on fan modes: parallel with compressor or continuous running.
Describes how the heater activates based on sensor temp and initiates defrost cycle.
Explains automatic defrost initiation, termination, and draining time based on sensor or duration.
Methods for controlling fan restart after defrost, either by time or temperature.
Details on how the unit responds to sensor failures (short circuit, open circuit, overheating).
Specifications for conductor sizes and precautions for wiring control load terminals.
Important considerations for controller placement, sensor installation, and handling disruptions.
Common problems like appliance not running or running too much, with causes and corrections.
Troubleshooting for interior temperature being too cold, too warm, or warm external surfaces.
Addresses louder sounds, popping, cracking, or gurgling noises and their normal causes.
Explains moisture formation inside due to humidity and door usage.
Addresses odors and suggests cleaning and covering food tightly.
Troubleshooting for doors not closing properly, often related to leveling or gasket issues.
Guidance for when the interior light bulb is not working.
Details the two-year limited warranty and additional compressor warranty.
Lists items and conditions not covered by the warranty, such as wear and tear or misuse.
Outlines limitations on implied warranties and liability for consequential damages.
Provides contact details for service in the USA and Canada.
Record appliance model and serial number from the unit's serial plate for reference.
Fill out and return the product registration card for warranty and service purposes.
Covers safe use of outlets, avoiding extension cords, proper grounding, and unplugging procedures.
Lists actions to avoid, such as unauthorized repairs or storing flammables inside the unit.
Recommendations for placing the unit on stable surfaces in well-ventilated, indoor areas, away from heat.
Details on ensuring proper voltage, grounded outlets, and dedicated circuits for the appliance.
Allow 24 hours for the appliance to reach optimal cooling before loading food.
Instructions on adjusting the temperature control after initial operation and stabilization.
Explanation of the automatic defrost cycle and how to set the defrost timer.
Steps for cleaning the inside of the appliance using warm water and baking soda solution.
Guidelines for cleaning the appliance exterior with mild detergent and water.
Information about the condensate pan and why it should not be removed.
Advice on loading food, ensuring proper air circulation to maintain performance.
Guidance on maintaining optimal operating conditions and ambient temperature for efficiency.
Instructions for periods of non-use and safe procedures for moving the appliance.
Overview of the world-known brand SCM temperature controller, its reliability, and ease of operation.
Lists key functionalities like temperature display, control, fan operation, and defrost.
Details on power supply, temperature ranges, sensor type, and contact capacities.
Explanation of what each LED (Refrigerant, Constant Temp, Delay, Defrost, Fan) indicates.
Instructions for setting temperature, manual defrost, and displaying evaporator temperature.
Guidance on entering password, checking/adjusting parameters, and changing menu password.
Explains compressor operation based on set temperature and hysteresis, including safety cut-offs.
Details on fan modes: parallel with compressor or continuous running.
Describes how the heater activates based on sensor temp and initiates defrost cycle.
Explains automatic defrost initiation, termination, and draining time based on sensor or duration.
Methods for controlling fan restart after defrost, either by time or temperature.
Details on how the unit responds to sensor failures (short circuit, open circuit, overheating).
Specifications for conductor sizes and precautions for wiring control load terminals.
Important considerations for controller placement, sensor installation, and handling disruptions.
Common problems like appliance not running or running too much, with causes and corrections.
Troubleshooting for interior temperature being too cold, too warm, or warm external surfaces.
Addresses louder sounds, popping, cracking, or gurgling noises and their normal causes.
Explains moisture formation inside due to humidity and door usage.
Addresses odors and suggests cleaning and covering food tightly.
Troubleshooting for doors not closing properly, often related to leveling or gasket issues.
Guidance for when the interior light bulb is not working.
Details the two-year limited warranty and additional compressor warranty.
Lists items and conditions not covered by the warranty, such as wear and tear or misuse.
Outlines limitations on implied warranties and liability for consequential damages.
Provides contact details for service in the USA and Canada.
General| Brand | Kelvinator |
|---|---|
| Model | KCBM48FS |
| Category | Refrigerator |
| Language | English |
