Why is the hot water temperature fluctuating in my Kelvinator Water System?
If you're experiencing temperature fluctuations with your Kelvinator Water System, start by checking if the filter on the cold water inlet is clean. Also, verify that the gas line is properly sized and that the supply gas pressure is adequate. Finally, ensure that the cold and hot water lines are not cross-connected.
Why does the hot water from my Kelvinator Water System get cold and stay cold?
If the hot water from your Kelvinator Water System gets cold and stays cold, it could be due to several reasons. Make sure the flow rate is enough to keep the water heater running. Check that the gas supply valve is fully open and the filter on the cold water inlet is clean. Also, ensure that the fixtures are free of debris and obstructions.
General| Brand | Kelvinator |
|---|---|
| Model | KGC20BNA |
| Category | Water System |
| Language | English |
Covers risks from water temperature, flammables, electrical hazards, and general precautions for safe use.
Steps to take if you smell gas, including what not to do, and contact procedures.
Essential checks before operating the water heater, including gas and water connections and venting.
Step-by-step guide for initial activation after shutdown or commissioning, including water and gas isolation.
Procedure for safely shutting down the hot water system, including electrical and gas isolation.
Steps for normal use of the hot water system using basic controls, including flow rates.
Guide for using the KGCMRCA remote for temperature control, activation, and setting.
Instructions for draining and shutting down the system to prevent freezing during extended non-use.
Detailed steps for draining the unit and cleaning the cold-water inlet filter for routine maintenance.
Solutions for problems related to water temperature, flow rate, and availability.
Troubleshooting for burner ignition, fan motor operation, and vapour emissions.
Solutions for problems with the remote controller display, error codes, and temperature settings.
Details the terms and conditions for product warranties, including coverage and exclusions.
Instructions on how to make a warranty claim, including required information and contact numbers.
To Next Page
