Operation Instructions
2) Turn " " to adjust the hour figures, the input time should be within 0--23 or 1-12.
3) Press " ", the minute figures will flash.
1. Clock Setting
When the microwave oven is electrified, the LED will display "0:00", buzzer will ring once.
1) Press " " once to choose 24 hour format,press twice to choose 12
hour format.
4) Turn " " to adjust the minute figures, the input time should be within 0--59.
5) Press " " to finish clock setting. ":" will flash, and the time will light.
Note: 1) If the clock is not set, it would not function when powered.
2) During the process of clock setting, if you press " ", the oven
will go back to the previous status automatically.
1) Turn " " right, the screen display "P100".
3) Press " " to confirm, and the screen displays "P 80".
4) Turn " " to adjust the cooking time until the oven displays "20:00".
5) Press " " to start cooking .
Note: the step quantities for the adjustment time of the coding switch are as follow:
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
2) Continue turning " " to choose 80% microwave power.
8
2. Microwave Cooking
Example: If you want to use 80% microwave power to cook for 20 minutes, you can
operate the oven as the following steps.
Clock/ Pre-Set
Clock/ Pre-Set
Clock/ Pre-Set
Stop/Pause
Turn " " right to choose microwave cooking, continue turn " " right or left to
choose the power you want. "P100","P80"....."C-1"or "C-2".The LED will display in
order. Then press" " to confirm, and turn " " to set cooking
time from 0:05to 95:00. Press " " again to start cooking.
Start/+30Sec./Confirm
Start/+30Sec./Confirm
Start/+30Sec./Confirm
Start/+30Sec./Confirm
To Next Page
Loading...