7
steps 2-6, after you finish all setting, press “OK” key to confirm or
wait 15 seconds to confirm automatically..
PROG default value: 0
：00-7：30 7：30-18：00
18：00-22：30 22：30-00：00
COPY FUNCTION
1. Hold “ ” key for 3 sec., COPY and week flashing.
2. Press “+”or “-”key to choose the day you want to copy from.
3. Press “ ” key again, COPY will not flash and week start to flash.
4. Press “+”or “-”key to choose the week you want to copy to. Press “
” key again, the program will been downloaded.
5. You can also choose the other day to copy to as step 4, after finishing
it, press “OK” key to confirm or wait 15 seconds to confirm it
automatically.
TEMPERATURE SETTING
1. Press “ ” key once, indicator and setting temperature (default value
22 ℃ ) will flash.Press “+” or “-”key to set sun temperature (0.5℃
increasement).
2. Press “ ” key, indicator and setting temperature (default value 15
℃ ) will flash.Press “+” or “-”key to set moon temperature (0.5℃
increasement).
3. Press “ ” key once, indicator and setting temperature (default
value 18 ℃ ) will flash.Press “+” or “-”key to set sleep temperature
(0.5℃ increasement).
4. Press “OK” key to confirm and exit or or wait 15 seconds to confirm it
automatically.
MANUAL OVERRIDE FUNCTION
A. Temporary override
Press “+”or “-”key to set override temperature, indicator will
display, after you finish it , press “OK” key to confirm and exit or auto-
exit in 15 sec . The temperature will be kept until next program begin,
or press “OK” key to exit.
To Next Page
Loading...
Need help?
General