Do you have a question about the Kemot PROsinus-500S and is the answer not in the manual?
Output Power | 300W |
---|---|
Input voltage | 220V ± 25% |
Output voltage | 220V ± 10% |
Output waveform | Pure sine wave |
Overload protection | Yes |
Short circuit protection | Yes |
High/Low voltage protection | Yes |
Over temperature protection | Yes |
Protection | Overload, Short circuit, High/Low voltage, Over temperature |
Cooling | Fan |
Operating Temperature | 0°C to 40°C |
Battery voltage | 12V |
Output frequency | 50Hz |
Efficiency | >85% (at full load) |
Details the front panel components, including the display and power button for device operation.
Describes rear panel components like cooling fan, circuit breaker, output sockets, and battery switch.
Explains the meaning of various display indicators, battery status, and error symbols.
Provides guidance on avoiding electrical interference from radio wave equipment.