10 / 16 – K410021000001-00 / 09.2021 – © www.kemper-olpe.de
EN
Note! In some countries the use
of combination units with water
and electric is not permitted. Please
follow the specific regulations for
the relevant country, if you want
to install the product outside of
Germany.
Danger! According to VDE require-
ments KEMPER MINI-TRESOR for
power and water connection have
to fuse by a residual current circuit
breaker (residual current 0,03A).
This applies to all sockets in outdo-
or area.
Description
Built-in wall cabinet (basic body)
2 4 attachment screws for built-in cabinet (4.8 x 80)
3 Frost-proof outdoor valve or hose bibb
4 2 attachment screws (M6 x 12)
5 Socket to fit selected Figur type
6 Mounting plate with attachment clasp and
7 Wing-screws
8 Trim frame and door with flap
9 Spray protection plate
10 2 attachment screws (M6 x 12)
11 Door lock with 3 keys
Disposal
Local regulations on waste
recycling and disposal must be
followed. The product must not be
disposed of with household waste
but must rather be disposed of
appropriately.
Note! In case of assembly the
Tresor in swimming pools or faci-
lities with compareable ambient
conditions, a regular cleaning of
the complete Tresor is necessary as
described before.
To Next Page
Loading...