Need help?Do you have a question about the Kemper TRESOR and is the answer not in the manual?
General| Brand | Kemper |
|---|---|
| Model | TRESOR |
| Category | Industrial Equipment |
| Language | English |
Follow manual instructions, use qualified plumbers, and pass manual to owner.
Use as intended; follow all warnings to prevent injury or material damage.
Details on material, pressure rating, chlorine environments, and proper condition of use.
Door lock can be replaced; electrical/plumbing work requires specialists.
Regular cleaning with stainless steel cleaner; avoid abrasive agents.
Install in dry, frost-free rooms; perform leak and functional tests before completion.
Warranty voided by incorrect installation, unauthorized modifications, or improper operation.
Check country-specific rules for water/electric combination units outside Germany.
Specific cleaning required for pools or similar ambient conditions.
Follow local regulations; do not dispose of with household waste.
Use RCD (0.03A) for power/water connections as per VDE standards.
The wall opening must be 510 x 290 mm (Height x Width).
Consult architect for heat insulation, factoring into installation depth.
Develop fire protection concept with surveyor/planner for wall opening.
Notes on minimum/maximum depth, wall thickness for frost protection, and pipe laying.
Note on RCD (≤ 0.03A) and connection current (≤ 32A), IP 44 protection.
Connect earthing to cabinet screws and building metallic parts.
Lists specific models delivered with IP 55 protection.
Account for outer façade construction; trim frame allows 20mm compensation.
Install rear insulation, fix cabinet with screws, considering wall thickness.
Install fire protection lagging in masonry recess before inserting the cabinet.
Screw socket combination onto mounting plate and attach to cabinet wall.
Install fitting into hole, connect to water supply, and attach spray protection plate.
Install fitting, connect to water supply, and attach spray protection plate.
Slide trim frame with door over guide slots and secure with screws.
Conduct functional testing of the frost-proof outer fitting.
Fitting auto-drains; close gently after water removal for frost safety.
Remove hoses and attachments before the frost period to ensure frost safety.
To Next Page