13 / 16 – K410021000001-00 / 09.2021 – © www.kemper-olpe.de
Note!
• Push the wall plate on to the outlet housing as far as
the stop and adjust using the screw.
• Fit the hose sleeve and adapter as illustrated
4
Installation of frost-proof outer fitting
and spray protection
Screw the socket combination (5) (already wired) onto the moun-
ting plate (6), connect in the built-in wall cabinet (1) and attach to
the cabinet wall using the wing-screws (7) (20° swivel).
3
Installation of socket combination
Note!
Carry out a functional check.
Danger!
Electrical work must be carried out only by authorised
specialist personnel!
1.
Warning!
Installation must be carried out by qualified plumbers!
To Next Page
Loading...