HB-SF02 Diamond Dermabrasion
Structure
Vacuum Output
Vacuum Meter
Intensity Knob
Power Button
There is a white cylinder-shaped filter
inside. You could use a small soft
brush to brush off the dirt periodically.
Change this white filter into a new one
when it gets too congested.
No need to replace it frequently.
The vacuum connector of HB-SF02 is
different fromHB-SF01, HB-SF02 no need
the big round cotton filter.
Package Included
Diamond Dermabrasion Machine X 1
PVC vacuum hose 6*4 X 1
Stainless steel wands X 2
Diamond tips X 9
Cotton filter X 1 package (small round filter for the stainless
steel wand)
Rubber rings and fuses
Full detailed English manual/ instructions
Specifications
Voltage: 220V-240V/50Hz □
100V-120V/60Hz □
Power: 45W Fuse: 2A
Packing Size: 50* 39* 40cm G.W: 8.5kg
SI-BM01 Diamond Dermabrasion
Structure
Mirror
Wands Holder
Left Angle
Vacuum Connector
(Output)
Intensity Knob
Power Switch
Right Angle
Power Cord Socket
For Function & Operation Details please refer to:
Contents/ Function & Treatment/ ①
1- Finish all accessories connection first;
2- Turn on the black Power Switch to start the machine
→Adjust the Intensity Knob for the suction you want
→ Turn off the power button after use;
3- Disconnect the power cord, then disconnect and clean accessories.
2 3
To Next Page
Loading...
