EN - 16
The operating time will be calculated and
the oven will automatically start so that
cooking will finish at the set finishing time.
When the timer reaches zero, the oven will
switch off, an audible warning will sound
and the symbols “A” and
will flash.
Turn both control knobs to the “0” position
and press any key to stop the sound. The
symbol will disappear and the timer will
switch back to manual function.
To adjust the volume of the audible warning
sound, while the current time of day is
displayed, press and hold the “-” button for
1-2 seconds until an audible signal sounds.
After this, each time the “-” button is
pressed, a different signal will sound. There
are three different types of signal sounds.
Select the desired sound and do not press
any other buttons. After a short time, the
selected sound will be saved.
3. Use the “+” and
“-” buttons to set the
desired finishing time.
4. The current time will
reappear on the
screen, the symbols
“A” and “ ” will remain
illuminated.
When the timer reaches zero, the oven
will switch off and an audible warning will
sound. The symbol “A” will flash. Turn
both control knobs to the “0” position and
press any key on the timer to stop the
sound. Press “MODE” for 2 seconds the
“A” symbol will disappear and the timer will
switch back to manual function.
Full-automatic programming
This function is used to start cooking after
a certain period of time and for a certain
duration. A time of up to 23 hours and 59
minutes after the current time of day can be
set. Prepare the food for cooking and put it
in the oven.
1. Select the desired cooking function and
the temperature using the control knobs.
2. Press “MODE” until
you see “dur” symbol
on the screen. The
symbol “A” will flash.
3. Select the desired
cooking time period
using the “+” and “-”
keys.
4. Press “MODE” until
you see “end” symbol
on the screen. The
time and the symbols
“A” will flash.
5. Select the desired
finishing time using the
“+” and “-” keys. “ ”
symbol will disappear.
Add the cooking period
to the current time of
day. You can set a time
of up to 23 hours and
59 minutes after this.
6. The current time
will reappear on
the screen, and the
symbols “A”, and will
remain illuminated.
To Next Page