To Next PageTo Next PageWhy are there stains on my clothes after using my Kenmore 110.6813*410?
If there are stains on your load after drying in your Kenmore Dryer, add dryer fabric softener sheets at the beginning of the cycle, not to a partially dried load. Avoid using fabric softener sheets with steam cycles.
Why is my Kenmore Dryer making a humming noise during the Steam cycle?
If your Kenmore Dryer makes a humming or whining noise during the Steam cycle, it's likely the water pump running. This is normal, especially after installation or if the dryer hasn't been used for a while; the pump may be louder and run longer.
Why are there stains on the drum of my Kenmore 110.6813*410 Dryer?
Drum stains in your Kenmore Dryer are caused by loose dyes in clothing, often from blue jeans. These stains won't transfer to other clothing.
What does “PF” mean on my Kenmore 110.6813*410?
If your Kenmore Dryer displays “PF” (power failure), the drying cycle was interrupted by a power failure. Touch and hold START to restart the cycle, or press power to clear the display.
General| Appliance Category | Dryer |
|---|---|
| Brand | Kenmore |
| Model Number | 110.6813*410 |
| Capacity | 7.0 cu. ft. |
| Color | White |
| Voltage | 240V |
| Amperage | 30A |
| Width | 29 inches |
| Height | 43 inches |
| Weight | 120 lbs |
| Control Type | Electronic |
| Number of Cycles | 12 |
| Number of Temperature Settings | 4 |
| Wrinkle Guard Option | Yes |
| End of Cycle Signal | Yes |
| Type | Electric |
| Drum Material | Powder-Coated Steel |
