To Next PageTo Next Page
Need help?Do you have a question about the Kenmore 11078002012 and is the answer not in the manual?
Specific safety warning regarding dryer installation and materials that increase fire risk.
Instructions for handling gas leaks, flammable materials, and general safety precautions.
Precautions to reduce risk of fire, electric shock, or injury during dryer use.
Lists necessary tools, supplied parts, and required parts for dryer installation.
Details on safe dryer placement, ventilation clearances, and explosion risks.
Specific requirements for installing dryers in mobile homes, including safety standards.
Steps for preparing the dryer and screwing in leveling legs for proper installation.
Electrical specifications for connecting the dryer in Canada, including voltage and circuit requirements.
Essential instructions for properly grounding a cord-connected dryer to prevent electric shock.
Electrical specifications for gas dryers, including voltage, circuit, and outlet requirements.
Critical requirements for gas supply connection, including safety warnings and pressure considerations.
Information on gas types, conversion procedures, and technician requirements.
Guidelines for gas supply line installation, including pipe size, shutoff valves, and fittings.
Details on recommended and alternate methods for connecting the dryer's gas supply line.
Information on burner input adjustments for elevation and gas supply pressure testing procedures.
Specifications for exhaust hood placement and acceptable elbow types for optimal dryer venting.
Recommendations for rigid metal vents, flexible metal vents, and secure clamping methods.
Potential issues caused by improper venting, such as moisture damage and health problems.
Typical dryer venting configurations from the rear and optional side/bottom exhausts.
Specific venting systems designed for installations with limited space behind the dryer.
Catalog of available venting kits with part numbers and descriptions for various installation needs.
Guidance on selecting the straightest and most direct path for dryer exhaust venting.
A chart detailing vent length limits based on the number of 90° turns and vent type for optimal performance.
Instructions for installing the exhaust hood and sealing the exterior wall opening.
Steps for connecting the dryer's exhaust vent to the wall outlet using clamps.
Detailed steps for connecting the gas supply line to the dryer, including fitting types and compounds.
Instructions for connecting the dryer's exhaust vent to the wall outlet using clamps.
Guidance on moving the dryer to its final position and removing protective materials.
Steps for opening the gas supply shut-off valve and testing connections for leaks.
Procedures for checking dryer levelness and adjusting leveling legs for optimal operation.
A comprehensive checklist to ensure all installation steps are completed correctly before operation.
Steps to troubleshoot if the dryer does not start or produce heat, including checking power and gas supply.
Step-by-step instructions for safely removing the dryer door and its attached hinges.
Guidance on reattaching the door hinges and the door panel after reversing the swing.
General
