: _i:!i!!i:!_:i!i_¸:
10
PICklinG IP BOBBII_! TIIREAI)
Raise presser foot lever.
Hold needle thread loosely in left hand and rotate hand
wheel toward you one complete turn. Bring bobbin
thread up by pulling upper thread (See illustration).
Place threads back under presser foot.
ADJISTI.\G Tile PRESS[Rii
O__ Tlli_ PllliSSiill FOOT
Push down outer ring of presser foot pressure regulator
(See illustration). This will release pressure of presser
foot. To increase pressure, push down inner pin until
suitable pressure is obtained.
For ordinary sewing, the inner pin should be about half
way down. When sewing multiple thickness or heavy
material, reduce the pressure: Increase it when sewing
sheer fabrics.
Insufficient pressure may cause skipped stitches or dif-
ficulty in guiding the fabrics. If feed dog or presser foot
marks appear on the fabric, reduce the pressure.
To Next Page
Loading...
