CLEAHIHGAHDOILiHG............
Keep the moving parts free from dust and threads for quiet and efficient operation.
Cleaning should be done with a small brush, never with a sharp or pointed tool. When
machine runs hard or makes excessive noise, place a drop of KENMORE sewing
machine oil at the points indicated by arrows.
To oil top of _e machine, place a few drops of oil through the holes on the top cover
plate while the needle is at the lowest point, or remove top cover plate by unsm_ewing
two screws and oil at the points indicated by arrows. (Model 1206)
Tilt machine head back to oil points indicated on underside of machine hexad.
/
22
To Next Page
Loading...
