SETTING SPOOL PINS
Spool Pins are packed in accessory box.
Screw thread spool pins in place securely with a screw driver.
Position nylon discs as shown in illustration,
(A)
i
\
\
(B)
_NSTALLING EXTENSION TABLE
For all flat-bed sewing use the extension table provided with the machine. To install the
extension table, simply slide the table along the free arm until the two Pins (A) and (B)
enter fitting holes in the machine.
Lower the support leg,
To utilize free-arm feature for sewing tubular material, remove the extension table from
the machine by pulling it to the left_
5
To Next Page
Loading...
