Kenmore 158 Series User Manual

2
Tuning up your machine
There are three main points to a tune-up on a sewing machine.
-Cleaning and oiling
-Hook and feed timing
-Internal tension adjustment
Start by removing the covers on your machine.
DO NOT START ANY REPAIRS WITH OUT UNPLUGGING THE
MACHINE FROM THE WALL OUTLET
Remove the screws on the top cover. Gently lift the cover off of the
machine. Fig. A. Different models have top cover screws in different
spots. Some 158 models you simply pull off the top cover (there will
be no screws).
Check for thread or lint caught in any of the parts in the top of the
machine
Open the needle bar cover. Check for any thread that may be caught
in the take-up. Fig. B. By turning the hand wheel toward you, you can
see if there is anything caught.

Kenmore 158 Series Specifications

General

Type	Mechanical
Needle Threading	Manual
Buttonhole Styles	4-step
Stitch type	Decorative
Stitch Options	Adjustable stitch length and width
Needle Positions	Left, center, right
Presser Feet	Buttonhole, Zipper
Speed Control	Foot pedal
Built-in Stitches	12
Material	Metal frame with plastic components