Access panel
. Push up with thumbs on each end of access
panel top trim to unsnap
trim, Remove trim and
set aside,,
3. With desired color facing out, slide access panel
into access panel frame.
%
2. Carefully slide access oanel upward and remove.
Do not remove spacer.
4. Make sure access panel has slid into groove
along bottom of access panel frame.
5. Line up edges of top trim with sides of access
panel frame. Tilt back of
trim down and slide into
placer Snap front of trim
down to cover top edge
of access panel,
22
To Next Page
Loading...
