Kenmore 46-76252 - Page 2

20007
page 2 of 2
Effective 12/03/07
Because of our continuous program of product improvement, Sears
reserves the right to change materials and specifications without
notice. Consult installation instructions packed with the product for
final dimensional data. For complete warranty information, contact
your local Sears Commercial Account Manager.
bottom freezer refrigerator | 46-76252/3/4/9
46-7625X.PDF
Measure Twice...Order Once
Step-by-Step Instructions to Assure You Order the Proper Size Refrigerator
Measure Height
including flooring.
Be sure to allow
for hinge clearance
h
eight if needed.
Measure Width
including countertop
o
verhang.
Measure Depth
including
m
olding or trim.
It’s Just Good Measure To Double Check Before You Order!
1
. Measure the opening for the refrigerator. Don’t forget baseboards, molding, tile,
c
ountertop overhang, etc. If there is an island in your kitchen, be sure there is enough
r
oom to open the door.
2
. Refer to the chart for the exact dimensions of the refrigerator.
3. IMPORTANT! Calculate the minimum opening required. When installing next to
cabinets, you must allow for Door Edge Clearance. (Multiply Door Edge Clearance
by 2 for counter-depth models.)
When installing next to a wall, you must allow for the Handle Clearance.
Adjacent Cabinet: ____ “F” + ____ Door Edge = ____ Min. Opening
A
djacent Wall: ____ “F” + ____ Handle = ____ Min. Opening
4
. Calculate how much the refrigerator will protrude from cabinetry. If the result is
u
ndesired, consider a counter-depth model.
____ “C” – ____24" Cabinet Depth + ______appro_x_. 2"____ Electric and Water Connection
Clearances = _____ which will Protrude Past Cabinets
5
. Measure each door and entry way in the home leading to the kitchen to ensure the
r
efrigerator can be moved through.