Need help?Do you have a question about the Kenmore 795.77573600 and is the answer not in the manual?
General| Type | French Door |
|---|---|
| Ice Maker | Yes |
| Water Dispenser | Yes |
| Finish | Stainless Steel |
| Width (in.) | 35.75 |
Read and follow all safety instructions before servicing the refrigerator for safe operation.
Details electrical ratings, performance data, and installation clearances.
Lists common replacement parts and illustrates the air circulation path.
Diagram identifying all major external and internal parts of the refrigerator with corresponding labels.
Details basic operation, temperature display toggle, control panel lock, and filter status.
Explains Ice Plus selection, dispenser use, and dispenser light functions.
Describes the operation of the cooling fan, freezer fan motor, and icing fan.
Covers Ice Plus function, lamp auto-off, and the audible alarm for open doors.
Explains the defrosting process, its conditions, and the defect diagnosis system.
Details the step-by-step operational principle of the icemaker system.
Explains icemaking mode, harvest mode, and water fill/park position.
Describes ice maker test procedures and lists error codes for the water supply control panel.
Provides a detailed circuit diagram illustrating the electrical connections of refrigerator components.
Details the compressor's role, composition, and important usage notes.
Outlines a diagnostic flowchart for checking compressor operation and power supply.
Covers PTC composition, role, circuit diagram, restart, cooling, and usage precautions.
Defines OLP, its role, and provides steps to remove the PTC cover.
Summarizes error codes, their categories, and causes for refrigerator malfunctions.
Guides troubleshooting for Freezer Sensor Error (Er-FS), including checks and replacements.
Focuses on sensor and PCB checks for Refrigerator Sensor Error (Er-rS).
Details wire and sensor resistance checks for Defrost Sensor Error (Er-dS).
Involves sensor and PCB verification for Icing Room Sensor Error (Er-IS).
Checks voltage and resistance related to the defrost heater for Error (Er-dH).
Checks voltages and fan motor condition for Freezer Fan Error (Er-FF).
Includes fan rotation and feedback voltage checks for Condenser Fan Error (Er-CF).
Checks fan voltages and feedback signals for Icing Room Fan Error (Er-IF).
Checks voltages and connections between main and display PCBs for Communication Error (Er-CO).
Guides troubleshooting for the Cube mode when it is not functioning.
Details troubleshooting steps for the Crush mode when it fails to operate correctly.
Provides steps for diagnosing issues with the freezer compartment lamp.
Guides diagnosis for the refrigerator compartment lamp when it is not working.
Focuses on PCB, fan voltage, and cooling performance checks for poor cooling.
Involves checking damper resistance and operation for temperature compensation.
Tests damper resistance and fan operation for over cooling problems.
Covers test mode initiation, wire color codes, and terminal position assurance handling.
Details checking fan errors by monitoring motor lock status and feedback signals.
Explains how to test the defrost controller, fuse-m, and sensor for proper function.
Describes how to measure the resistance of the sheath heater to determine its condition.
Details the procedure for testing the door heater assembly's resistance for proper function.
Explains how to test door switches using a multimeter for continuity and proper operation.
Describes how to test the dispenser solenoid by measuring its resistance for proper function.
Details testing procedures for the geared motor and solenoid within the ice maker assembly.
Explains how to test the damper by checking resistance between specified connectors.
Describes how to test the lamp socket for continuity using a multimeter.
Details testing procedures for the first and second water valves by measuring resistance.
Step-by-step guide for removing and replacing the refrigerator doors.
Instructions for removing and replacing the refrigerator door gasket and frame cover.
Explains how to align refrigerator doors if the space between them is uneven.
Provides instructions for disassembling the evaporator fan and motor assembly.
Steps for replacing the ice fan scroll assembly, including grille and wire harness disconnection.
Details how to replace the defrost control assembly, consisting of the defrost sensor and fuse-M.
Instructions for replacing compartment lamps, including safety precautions and bulb removal.
Explains how to remove the refrigerator control box by loosening screws and disconnecting wires.
Covers disassembly of multi duct, main PCB, dispenser, display PCB, and funnel.
Guides for replacing sub PWB, duct door, ice corner door, and icemaker assembly.
Steps for removing the auger motor cover, including screw and harness disconnection.
Instructions for safely removing and correctly inserting the door ice bin assembly.
Detailed steps for removing the refrigerator's pullout drawer assembly.
Follow-up steps for correctly reinstalling the pullout drawer, ensuring proper alignment.
Procedures for disassembling water valve and fan/fan motor, noting reassembly care.
Describes how to separate and install the pull out drawer, focusing on hook and gear mechanisms.
Identifies the main PCB assembly and its various connectors (CON1-CON7).
Provides an alternate view and identification of the main PCB assembly and its connectors.
Identifies the display PCB and dispenser drive PCB assemblies and their respective connectors.
To Next Page