Need help?Do you have a question about the Kenmore 795.78412.800 and is the answer not in the manual?
Procedure for safely disconnecting power and ensuring grounding before service.
Details on voltage, current, temperature, and no-load performance.
Information on compressor capacity, pressure, and refrigerant type.
Specifies required clearances for proper air circulation.
List of common replacement parts with part numbers.
Step-by-step guide for removing refrigerator doors and aligning them.
Instructions for disassembling and replacing the evaporator fan motor.
Procedures for replacing defrost control assembly and compartment lamps.
Steps for removing dispenser, main PWB, and other internal parts.
Procedures for removing icemaker assembly and auger motor cover.
Guides for removing pull-out and glide-out freezer drawers.
Steps for fan motor disassembly and cover valve replacement.
Information on compressor role, composition, and usage notes.
Covers PTC/OLP roles, relation, and usage notes.
Diagram illustrating PTC starter application for motor starting.
Procedure for safely removing the PTC cover for access.
Comprehensive schematic illustrating the electrical connections and components.
Diagnosing problems with the compressor and related electrical parts.
Troubleshooting guide for fans, sensors, and defrost system components.
A chart correlating refrigerator complaints with points to check and remedies.
Diagnosing issues based on the refrigeration cycle state and component temperatures.
Describes the main stages of icemaker function from power on to park position.
Details icemaking, harvest, and fill/park modes, including water supply.
Explains test modes and how to interpret error codes displayed by the icemaker.
Covers general operation, display toggling, lock function, and filter indicators.
Details Ultra Ice, dispenser usage, dispenser light, and fan motor control.
Explains freezer and cooling fan motor control strategies.
Explains Ultra Ice activation, lamp auto-off, and door alarms.
Covers defrosting management and defect diagnosis functions.
Explains test modes for components and function testing procedures.
Describes the power supply and voltage regulation for the control board.
Covers drive circuits for loads, fans, and open door detection switches.
Details sensor resistances at various temperatures for diagnostic purposes.
Explains damper motor and dispenser component drive circuits.
Diagnosing problems related to power supply and cooling effectiveness.
Troubleshooting freezer temperature issues and defrosting failures.
Shows the layout and components of the main control board.
Shows the layout and components of the dispenser control board.
Illustrates major external components and their exploded view for identification.
Lists and illustrates parts within the freezer section for replacement.
Lists and illustrates parts within the refrigerator section for replacement.
Lists and illustrates parts located on or in the refrigerator doors.
Lists and illustrates components of the water/ice dispenser.
Lists and illustrates parts related to the ice making system.
Lists and illustrates water system components for replacement.
General| Brand | Kenmore |
|---|---|
| Model | 795.78412.800 |
| Category | Refrigerator |
| Language | English |
To Next Page