Kenmore 81714 - Motor Safety Filter Cleaning Guide; Cleaning and Replacing the Motor Safety Filter

- 18 -
2. Lift the rubber retainer and pull out motor
own.
3. r, rinse,
then dry. Do not clean in dishwasher or
install while damp.
4. 
place under the ribs in the bag cavity. Tuck

rubber retainer.
5. Replace the bag as outlined in the DUST
BAG CHANGING (page 17) section.
MOTOR SAFETY FILTER CLEANING
MOTOR SAFETY FILTER
Check motor safety  occasionally and
clean when dirty.
NOTE: See REPLACEMENT PARTS for part
number detail (page 5).
1. Remove the bag as outlined in the DUST
BAG CHANGING (page 17) section.
Rubber
Retainer
WARNING
Electrical Shock Hazard
Trom
electrical outlet. Do not operate the
vacuum cleaner without the motor safety
rry and properly
installed to prevent motor failure and/or
electrical shock.