Kenmore 81714 - Exhaust Filter Replacement Instructions; Procedure for Changing the Exhaust Filter

- 19 -
4. Insert the new ertridge
into the canister with the rubber seal
towards the canister.
5. To replace the eover place
the twover into the
canister.
6. While holding latch down r
cover into place.
7. over
is locked into place.
Exhaust
Filter
Tabs
EXHAUST FILTER CHANGING
EXHAUST FILTER - HEPA MEDIA
The exhaust  cartridge must be
replaced when dirty. Replace the 
when the entire surface area is covered
evenly. The  CANNOT be washed as
it will lose its dust trapping ability.
NOTE: See REPLACEMENT PARTS for part
number detail (page 5).
WARNING
Fire and/or Electrical Shock Hazard
Do not operate with a clogged exhaust
e

cover installed.
1. Press latch to release the exhaust 
cover from slot in canister.
2. 

Latch
Filter
Cover
3. Remove the ertridge.
Exhaust
Filter
Push
Here
1
2