EasyManuals Logo

Kenmore 970F27012 User Manual

Kenmore 970F27012
15 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
15
Before You Call
CONCERN POTENTIAL CAUSE COMMON SOLUTION
Popping or cracking
sound when com-
pressor comes on.
Metal parts undergo
expansion and
contraction, as in hot
water pipes.
This is normal. Sound will level o or
disappear as appliance continues to run.
Bubbling or
gurgling sound, like
water boiling.
Refrigerant (used to
cool appliance) is
circulating throughout
the system.
This is normal.
Vibrating or
rattling noise.
Appliance is not level. It
rocks on the oor when it
is moved slightly.
Floor is uneven or
weak. Appliance rocks
on oor when it is
moved slightly.
Appliance is touching
the wall.
Level the unit. Refer to “Leveling” in the
Leveling Instructions Section.
Ensure oor can adequately support appliance.
Level the appliance by putting wood or metal
shims under part of the appliance.
Re-level the appliance or move appliance
slightly. Refer to Leveling Instructions.
WATER/MOISTURE/FROST INSIDE APPLIANCE
Moisture forms on
inside walls.
Weather is hot and
humid, which increases
internal rate of frost
build-up.
Door may not be
seating properly.
Door is kept open too
long, or is opened
too frequently.
This is normal.
See “DOOR PROBLEMS” in Before You Call.
Open the door less often.
ODOR IN APPLIANCE
Odor in appliance Interior needs to
be cleaned.
Foods with strong odors
are in the appliance.
Clean interior with sponge, warm water, and
baking soda. Replace air lter.
Cover the food tightly.
DOOR PROBLEMS
Door will not close. Appliance is not level. It
rocks on the oor when
it is moved slightly.
Floor is uneven or
weak. Appliance rocks
on oor when it is
moved slightly.
This condition can force the cabinet out
of square and misalign the door. Refer to
Leveling Instructions.
Ensure oor can adequately support freezer.
Level the oor by using wood or metal shims
under the appliance or brace oor supporting
the appliance.
LIGHT IS NOT ON
Light is not on. The light is burned out or
LED bulb is damaged.
No electric current is
reaching the appliance.
Control system has
disabled lights because
the door was left open
too long.
Replace LED light bulb.
See “Appliance does not run” in Before You Call.
Close and reopen door to enable lights.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kenmore 970F27012 and is the answer not in the manual?

Kenmore 970F27012 Specifications

General IconGeneral
BrandKenmore
Model970F27012
CategoryFreezer
LanguageEnglish

Related product manuals