Kenmore BC4027 - Additional Troubleshooting; Check Bag Indicator Activation; Rug Pickup or PowerMate Resistance; Cord Rewind Problems

- 24 -
CHECK BAG Indicator 1. Full or clogged dust bag. 1. Change bag.
activates. 2. Dirty filters. 2. Clean/change filters.
3. Blocked airflow passage. 3. Clear blockage from airflow
passage.
4. Certain attachment tools. 4. This is normal. Light should go off
when tool is removed.
Vacuum cleaner picks 1. Wrong pile height setting. 1. Adjust setting.
up moveable rugs -or- 2. Suction too strong. 2. Select lower Power Level.
PowerMate
®
pushes too
hard.
Cord won’t rewind. 1. Dirty power cord. 1. Clean the power cord.
2. Cord jammed. 2. Pull out cord and rewind.
Vacuum cleaner leaves 1. Wrong vacuuming pattern. 1. See VACUUMING TIPS. (page 12)
marks on carpet.
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION