- 26 -
Constant blue light on
in dirt sensor.
Check bag indicator
activates.
Lenses are dirty.
Clean lenses.
Certain attachment tools.
This is normal. Light should go off
when tool is removed.
Suction too strong. Select lower Power Level.
Cord jammed. Pull out cord and rewind.
Wrong vacuuming pattern.
See VACUUMING TIPS (page 12).
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
Vacuum cleaner picks
up moveable rugs -or-
PowerMate
®
pushes too
hard.
Cord won’t rewind.
Vacuum cleaner leaves
markson carpet.
Dirt passage is clogged.
Check for clogs in air passages.
Full or clogged dust bag. Change bag.
Dirty filters. Change filters.
Blocked airflow passage.
Clear blockage from airflow passage.
Wrong pile height setting.
Adjust setting.
Dirty power cord. Clean the power cord.
To Next Page
Loading...
