To Next PageTo Next PageWhy is my Kenmore CSV Go DS4015 Vacuum Cleaner not picking up?
If your Kenmore Vacuum Cleaner isn't picking up dirt or the suction is weak, here's what you can do: * Empty the dust cup. * Clean the filter, following the instructions on pages 12-13. * Charge the battery as instructed on page 9. * Check the dust cup for correct installation, ensuring it's firmly in place.
How to fix a Kenmore Vacuum Cleaner that won't turn on?
If your Kenmore Vacuum Cleaner won't power on, here are a few things to check: * Charge the battery as instructed on page 9. * Ensure you are using only the charger supplied with your product. * Remove any obstruction from the brush roll. * If the hand vacuum or battery is damaged, call 1-877-531-7321 for assistance.
What to do if the nozzle motor spins, but the brush roll doesn't rotate on my Kenmore Vacuum Cleaner?
If the nozzle motor is spinning but the brush roll isn't rotating on your Kenmore Vacuum Cleaner, the belt is broken. Call 1-877-531-7321 for assistance.
Why is dust coming out of my Kenmore CSV Go DS4015?
If dust is escaping from your Kenmore Vacuum Cleaner, take these steps: * Check the filter for correct installation. * Empty the dust cup container or position the dust cup correctly and snap firmly into place. * Reinstall the pre-filter correctly as instructed on page 12-13. * If the filter is damaged and needs to be replaced, call 1-844-202-9924.
What to do if the battery indicator flashes red on my Kenmore Vacuum Cleaner?
If the battery indicator on your Kenmore Vacuum Cleaner flashes red and then turns off, it indicates an obstruction of brush roll or missing of the filters. Turn off the unit, remove any obstruction in the brush roll or motor section, reinstall the filters, and restart. If it still won't restart, call 1-877-531-7321 for assistance. Also, ensure that the battery is charged as instructed on page 9 and the brush roll is properly installed.
Why does my Kenmore CSV Go DS4015 keep turning off?
If your Kenmore Vacuum Cleaner turns off by itself, here are some potential causes: * The battery may be depleted. Charge the battery as instructed on page 9. * The brush roll in the motorized nozzle might be jammed or not installed well. Turn off the unit, remove any obstruction, or reinstall the brush roll as instructed on page 14, and then restart. * There may be excessive loading on the brush roll brush. Remove the obstruction and then restart. * If the battery is damaged, call 1-877-531-7321 for assistance.
Why is the battery indicator not illuminating when charging my Kenmore CSV Go DS4015 Vacuum Cleaner?
If the battery indicator on your Kenmore Vacuum Cleaner doesn't light up when charging, make sure the charging adapter is firmly plugged into the outlet and the charging connector is plugged into the charging port of the hand vacuum. Also, clean any dust from the charging port. Check the circuit breakers to ensure there is power at the electrical outlet. If the battery or the battery indicator is damaged, call 1-877-531-7321 for assistance.
Why doesn't the battery indicator illuminate when I use my Kenmore CSV Go DS4015?
If the battery indicator isn't lighting up while you're using your Kenmore Vacuum Cleaner, the battery might be low. Try charging it as instructed on page 9. If that doesn't work, the battery indicator itself might be damaged, and you should call 1-877-531-7321 for assistance.
What if the nozzle motor and brush roll aren't turning on my Kenmore CSV Go DS4015?
Check to confirm the connections are properly made on your Kenmore Vacuum Cleaner. Restart the unit. If the nozzle motor and brush roll are still not turning, the nozzle motor may be damaged. Call 1-877-531-7321 for assistance.
General| Brand | Kenmore |
|---|---|
| Model | CSV Go DS4015 |
| Category | Vacuum Cleaner |
| Language | English |
Lists all parts included in the vacuum cleaner package for verification.
Details the warranty terms, duration, and coverage for the vacuum cleaner.
Lists available replacement parts for the vacuum cleaner with their part numbers.
Instructions on how to properly charge the vacuum cleaner's battery.
Explains the location and function of the vacuum cleaner's control buttons.
Guides on how to operate the vacuum cleaner for effective cleaning.
Steps for emptying the dust cup and cleaning the vacuum cleaner's filters.
Instructions for manually cleaning the brush roll to remove debris and hair.
Steps to remove blockages from the vacuum cleaner's hose.
Addresses issues when the vacuum cleaner fails to turn on.
Solutions for when the brush roll in the motorized nozzle is not rotating.
Troubleshooting tips for low suction power or the vacuum not picking up debris.
Explains why the vacuum might turn off on its own and how to resolve it.
