3. Brush loose debris from HEPA filter and
pre-filter basket and then rinse with
warm water. Set both filters aside and
allow to air dry for 24 hours.
IMPORTANT:
The HEPA filter and pre-
filter must dry completely before reuse.
4. Place the pre-filter basket back into the
dust cup, then place the HEPA filter back
into the pre-filter basket.
2. Remove the HEPA filter and pre-filter
basket from the dust cup.
5. To reassemble the dust cup to the hand
vacuum, align the tabs on the dust cup
with slots in the hand vacuum. Once
aligned, attach the dust cup to the hand
vacuum until you hear a click.
- 13 -
HEPA Filter
Pre-filter Basket
Dust Cup
EMPTYING DUST CUP AND CLEANING FILTER
To Next Page
Loading...
