NOTE:
It is recommended to store
the vacuum within a temperature range
between 39.2°F (4°C) and 104°F (40°C).
Hose & Wand Blockage Removal
1. To clean out the hose and wand,
press the wand release button on the
motorized nozzle, and pull the motorized
nozzle away from the wand.
2. Carefully remove any debris or blockage
from the inside of the hose and wand.
Reattach the motorized nozzle onto the
wand.
3. Once the blockage is removed, start the
vacuum to ensure air flow through the
hose and wand.
- 17 -
CAUTION
Do not use scissors or other sharp objects
to remove a blockage from the hose.
CLEANING THE MOTORIZED NOZZLE & BLOCKAGES
Wand Release Button
To Next Page
Loading...
Need help?
General
