To Next PageTo Next Page
Need help?Do you have a question about the Kenmore Dishwasher and is the answer not in the manual?
General| Brand | Kenmore |
|---|---|
| Model | Dishwasher |
| Category | Dishwasher |
| Language | English |
Lists all necessary tools and parts for dishwasher installation.
Specifies ideal locations and site conditions for dishwasher installation.
Provides critical measurements for the dishwasher and cabinet opening.
Details requirements for the dishwasher drain hose connection.
Outlines necessary water pressure, temperature, and supply line types.
Specifies electrical supply voltage, amperage, wiring, and safety standards.
Steps to prepare the cabinet for utility hookups, with or without existing utilities.
Guidance on routing the electrical supply for power cord or direct wire.
Guides on preparing and routing the water supply line.
Instructions for connecting the drain hose to plumbing.
Details on connecting the drain hose with or without an air gap.
Important safety notices regarding tip-over and weight hazards.
Instructions for removing foam blocks and other shipping materials.
Steps to remove plastic or metal access panels for wiring.
Detailed steps for connecting the power supply cord to the dishwasher.
Critical safety warning regarding electrical shock.
Guides on measuring, fitting, and adjusting the dishwasher to the cabinet.
Steps to secure the power cord and reinstall the terminal box cover.
Instructions for securing the dishwasher to a countertop.
Instructions for securing the dishwasher to the side of a cabinet.
Steps for safely moving the dishwasher into its final cabinet opening.
How to adjust door spring tension if it closes too quickly or falls open.
Steps for moving the dishwasher fully into the cabinet opening.
Detailed instructions for connecting the water supply line.
Instructions for connecting the drain hose to plumbing.
Procedure for checking water supply connections for leaks.
Detailed steps for connecting the dishwasher via direct wiring.
Critical safety warning regarding electrical shock.
Verifying alignment and fastening the dishwasher to the cabinet.
Steps for securing the dishwasher to the countertop or side cabinet.
Verifying door clearance and inner tub spacing.
Final steps including reinstalling access panels.
Verifying the lower panel edge and tightening screws.
Restoring electrical power to the dishwasher.
Steps to verify the dishwasher is functioning correctly.
Steps to take if the dishwasher does not operate.
