- 8 -
The motorized nozzle and the combination
tool can be inserted into either the hand
vacuum or the wand. You will hear a
click if the motorized nozzle is installed
correctly.
Combination Tool
The combination brush can be used as a
crevice tool or as a dusting brush. To use
as a dusting brush, simply squeeze the
buttons in the side of the tool and shift
brush forward.
Friction Hold Stoppers
The back of the hand vacuum features
two rubber stoppers. When you lean the
stick vac against a wall, the stoppers help
prevent the unit from slipping down and
possibly being damaged.
NOTE:
For proper electrical contact,
always be sure that metal contact surfaces
of the motorized nozzle, the wand and the
hand vacuum are clean before use.
PARTS AND FEATURES
Rubber Stoppers
Crevice Tool Mode Dusting Brush Mode
To Next Page
Loading...
Need help?
General
