ENERGY SAVING TIPS
Taking a tool (at screwdriver or cone), insert it into the gap at the arrow
position in the gure and gently pry it upward to open the ip cover.
Take out the power cord from the storage compartment.
After removing the power cord, replace the ip cover.
The appliance should be located in the coolest area of the room, away from heat producing appliances or heating
ducts, and out of the direct sunlight.
Let hot foods cool to room temperature before placing in the appliance.
Overloading the appliance forces the compressor to run longer.
Foods that freeze too slowly may lose quality, or spoil.
Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance.
This cuts down on frost build-up inside the appliance.
The shelving basket should not be lined with aluminum foil, wax paper, or paper toweling.
Liners interfere with cold air circulation, making the appliance less ecient.
Organize and label food to reduce door openings and extended searches.
Remove as many items as needed at one time, and close the door as soon as possible.
9
USING YOUR FREEZER
POWER CORD
CHANGING THE LIGHT
(optional)
The LED light must be replaced by a professional from the manufacturer, its maintenance department or other similar
departments.
To Next Page
Loading...
