EasyManuals Logo

Kenmore SENSOR SMART User Manual

Kenmore SENSOR SMART
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
4242
Problem Possible Cause Solution
Dryer Will Power cord not firmly plugged Plug into a grounded 3 prong outlet.
Not Run in.
Fuse blown or circuit Replace fuse or reset breaker.
breaker tripped.
Using a regular fuse. Replace with a time-delay fuse.
Dryer door not firmly closed. Close dryer door tightly.
START pad not pressed. Press START pad.
Cycle not selected. Select cycle and press START pad.
Lint in Load Lint screen is clogged. Clean lint screen.
Improper sorting. Sort lint givers from lint takers
and by color.
Load is too big or heavy. Dry smaller loads so lint can be
carried to the lint screen.
Load is overdried. Use correct dryer settings for fabric.
Overdrying can cause lint-attracting
static (see “OPERATION”).
Paper or tissue in pockets. Clean out pockets before drying.
Pilling being mistaken for lint. Pilling (surface fuzz) is caused by
normal wear and laundering.
Stains on Load Improper use of fabric softener Use fabric softener sheets in dryer. Add
in washer. at beginning of cycle when load is cold.
Drying soiled items. Items need to be clean before
being dried.
Overdrying. Match dryer settings to fabric type
(see “OPERATION”).
Poor garment quality. Check quality of garment before
purchasing.
Manufacturer’s care label Follow fabric care label instructions
instructions not followed. carefully.
Overloading. Dry smaller loads that can tumble freely.
Overdrying. Match dryer settings to fabric type
(see “OPERATION”).
Load left in dryer at the Remove load as soon as tumbling
end of cycle. stops.
Odors Painting, staining, or varnishing Ventilate the area. When the odors or
has recently taken place in the fumes are gone from the area, re-wash
area where your dryer is located. the clothing and then dry it.
Gas leak Turn off gas supply line. Leave your
house, then call your local gas
company.
Clicking – gas valve clicking. Normal operation.
Thumping of rollers when Thump will go away after 5 minutes
dryer has set. of drying.
Items
Shrinking
Loads are
Wrinkled
Unusual
Sounds
8318111(v04) 3/3/00 9:57 AM Page 42

Other manuals for Kenmore SENSOR SMART

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kenmore SENSOR SMART and is the answer not in the manual?

Kenmore SENSOR SMART Specifications

General IconGeneral
BrandKenmore
ModelSENSOR SMART
CategoryDryer
LanguageEnglish

Related product manuals