8
C. INSTALL GAS LINE (pgs. 15-17)
Rigid gas supply line approved for
natural gas use (NOTE: additional
fittings may be required)
8-inch
or 10-inch
pipe wrench
3
⁄8-inch diameter, flexible stainless
steel 4-foot or 6-foot gas line
Pipe-joint
compound
resistant to
L.P. gas
Tools Needed:
Parts Needed:
Flashlight (optional
depending on installation)
3
⁄8-in male
pipe-to-flare
(optional depending
on installation)
3
⁄8-in to
3
⁄8-in
pipe elbow
Do not use pipe
joint compound
Use pipe joint
compound
To Next Page
Loading...
Need help?
General