Kennedy HAS413 User Manual

INSTRUCTION MANUAL
Please retain this information for future reference.
AVAILABLE FROM YOUR DISTRIBUTOR
 Solar power
 Auto light sensors
 Light to Dark:
0.0001 seconds
 Dark to Light:
0.1 - 0.5 seconds
 Control switching from
shade to shade 9-13
 High Impact resistance
 Clear view filter
 Permanent UV/IR
protection up to
DIN 15
 Light weight-less
than 0.5kg
MIG/TIG WELDING HELMET
www.kennedy-tools.co.uk
© The Kennedy Group Ltd. 09/07
KENNEDY TOOLS
Wigston Works, Leicester, England.
Kennedy is a registered trade mark of The Kennedy Group Ltd.
QUALITY GUARANTEE & WARRANTY
KENNEDY TOOLS carry a one year manufacturers warranty.
KENNEDY TOOLS are designed & manufactured
to the highest standards & specifications.
Assuring the quality and performance required by all sectors of industry.
KENNEDY TOOLS are fully guaranteed against
faulty materials & workmanship.
Should they be found to be defective, they will either be repaired or replaced
free of charge (fair wear and tear and/or misuse excepted).
Please retain supplier invoice as proof of purchase.
EEC PERSONAL PROTECTIVE EQUIPMENT DIRECTIVE
89/686/EEC Article 10
DECLARATION OF CONFORMITY
We hereby certify that the KENNEDY Welding Helmet Model HAS413
complies with all the relevant provisions of the EC Directive 89/686/EEC
as last amended by EEC Directive 96/58/EEC
Harmonised Standards Applied: DIN 15. EN175S, EN379 4/9-13 ER 1/2/1 DIN CE, ANSI Z87.1
Manufactured for KENNEDY TOOLS Wigston Works, Leicester, England.
ISO 9001 REGISTERED COMPANY
Signed: Position: Director, The Kennedy Group Ltd.
Name: Martin Cooke Date: 1st August 2004
MODEL HAS413
KEN-885-5020K

Kennedy HAS413 Specifications

General

Brand	Kennedy
Model	HAS413
Category	Motorcycle Accessories
Language	English

Summary

Declaration of Conformity

Product Information and Features

Product Model and Code

Identifies the specific welding helmet model HAS413 and its product code KEN-885-5020K.

Key Product Features

Lists key features like solar power, auto light sensors, switching times, and weight.

Quality Guarantee and Warranty

Warranty Terms and Conditions

States a one-year manufacturer's warranty against faulty materials and workmanship, with repair or replacement.

Proof of Purchase Requirement

Instructs users to retain the supplier invoice as proof of purchase for warranty claims.

Safety Precautions

General Safety Guidelines

Provides critical safety advice covering proper use, protection, ventilation, and avoiding hazards.

Shade Selection Guide for Arc Welding

Product Introduction and Technology

Automatic Filter Functionality and Speed

Explains the auto-darkening feature, switching times from light to dark and dark to light.

Shade Adjustment and UV/IR Protection

Covers continuous shade adjustment (9-13) and UV/IR protection up to DIN15.

Power Source and Construction Material

Details power source (solar cells) and outer plate material properties.

Technical Specifications

Filter and View Area Dimensions

Specifies the dimensions for the filter and the viewing area of the helmet.

Shade Ratings and UV/IR Protection

Lists light shade, dark shade range, and UV/IR protection level.

Switching Times and Power Supply

Details the time taken for light-to-dark and dark-to-light transitions, and the power source.

Operating Temperature and Weight

Specifies the operating temperature range and the total weight of the helmet.

Operating Instructions

Assembly and Power Operation

Guides on mask assembly and explains the automatic solar cell power system.

Shade Selection and Headband Fitting

Details shade adjustment and proper headband fitting for comfort and viewing angle.

Maintenance and Spare Parts

Changing Protection Plates

Instructions on how to remove and replace the inner and outer protection plates.

Cleaning Procedures

Guidance on cleaning the helmet using a soft brush or mild soapy water after disassembly.

Available Spare Parts List

Lists available spare parts with their product numbers and order codes.