Kensington V18P01BP25EU User Manual (English)

Questions and Answers:

L
Lisa IrwinAug 6, 2025
Why is my Kensington Vacuum Cleaner suction so weak?
- A
  Andrea LongAug 6, 2025
  Weak suction in your Kensington Vacuum Cleaner can stem from a few causes. First, the dust barrel and filter assembly might be dusty or full, requiring a thorough cleaning of both the dustbin and filter material. Another reason might be that the rolling brush is tangled with hair and other debris, so you should clean the roller brush. Finally, the tube may have an obstruction; carefully inspect and clean it to remove any blockages.
A
April MoralesAug 12, 2025
What to do if my Kensington Vacuum Cleaner doesn’t work?
- R
  Roy RichardsonAug 12, 2025
  If your Kensington Vacuum Cleaner isn’t working, there are a couple of things to check. First, the product may have powered off, or the battery could be low; in this case, charge the product before use. Also, the product suction port might be blocked. Cleaning the product suction mouth may resolve the issue.
M
michaelgregoryAug 21, 2025
Why my Kensington Vacuum Cleaner cannot be charged?
- L
  Lauren BowmanAug 21, 2025
  If your Kensington Vacuum Cleaner isn't charging, begin by ensuring the charger is properly connected. Also, verify that the mains supply is switched on.
M
Michael AguilarAug 27, 2025
How to fix different motor operation sound in Kensington Vacuum Cleaner?
- T
  Tara Franklin DVMAug 27, 2025
  An unusual motor sound in your Kensington Vacuum Cleaner could indicate that the tube is partially blocked; carefully clean and clear any obstructions. Another possibility is that the filter assembly is blocked, so thoroughly clean the filters.