Need help?Do you have a question about the Kensol-Franklin KTB and is the answer not in the manual?
General| Brand | Kensol-Franklin |
|---|---|
| Model | KTB |
| Category | Heat Pump |
| Language | English |
Technical specifications for KTB heat pump models, including capacity, power, and dimensions.
Physical dimensions and diagrams for KTB heat pump models.
Diagram and list of internal spare parts and components of the heat pump.
Important guidelines and precautions for installing the heat pump.
Recommendations for selecting an optimal location for the heat pump.
Guidance on placement relative to the pool to minimize heat loss.
Importance and procedure for installing a check-valve to protect the heat exchanger.
Illustrative diagram of the heat pump's plumbing system arrangement.
Step-by-step instructions for correctly adjusting the bypass valves.
Detailed instructions for safe and correct electrical wiring and connection.
Steps for safely starting and operating the heat pump for the first time.
Explanation of condensation formation on the evaporator during operation.
Instructions for installing anti-vibration bases, water junctions, and cable wiring.
Schematic showing the electrical connections for the heat pump.
Features and capabilities of the heat pump's control system.
Diagram illustrating the interaction between the outdoor unit and the remote controller.
Explains the meaning of various icons displayed on the remote controller's screen.
Guide to using the buttons on the remote controller for various functions.
Procedure for setting the current time on the heat pump controller.
Instructions for programming operational timing schedules for the unit.
How to check the count of set operational timing periods.
Steps to cancel programmed timing settings.
Method to manually activate the defrost cycle.
How to change between Powerful, Smart, and Silent operating modes.
Instructions for switching temperature display units.
How to manually enable or disable the electric heating function.
Guide to accessing and modifying advanced system parameters via password.
Procedure to reset all system parameters to their default factory values.
Lists error codes with descriptions and recommended solutions for troubleshooting.
Addresses malfunctions and solutions related to the LED controller display.
Steps for registering or logging into the Tuya Smart mobile application.
Instructions for connecting the heat pump to the mobile app via Wi-Fi.
Steps for connecting the heat pump using the app's compatibility mode.
To Next Page