Example: to set the following procedure as the second memory,
that is memory 2. to cook the food with 80% microwave power for 3minutes
and 20 seconds.
The steps are as follow:
a. In waiting states, press "0/MEMORY" twice,stop pressing until the screen
displays "2".
b. Press "TIME COOK" once,then press "3","2","0" in order.
c. Press "POWER" once,"PL10" display,then press "8" and "PL8" displays.
d. Press "START/ +30 SEC." to save the setting. Buzzer sounds once then
turn back to waiting states. If you press "START/+30SEC." again, the
procedure will be saved as the memory 2 and operated.
e. If the electricity is not cut off, the procedure will be saved all the time.
If it is, the procedure need to reset.
f. If you want to run the saved procedure, in waiting state,
press "0/MEMORY" twice, screen displays "2",
then press "START/+30SEC." to run.
11. Multi-stage cooking
At most 2 stages can be set for cooking. In multi-stage cooking, if one stage
is defrosting, then defrosting shall be placed at the first stage automatically.
Note: Auto cooking cannot work in the multi-stage cooking.
Example: if you want to cook with 80% microwave power for 5 minutes + 60%
microwave power for 10 minutes. The cooking steps are as following:
1) Press "TIME COOK" once, then press "5","0","0" to set the cooking time.
2) Press "POWER" once, then press "8" to select 80% microwave power.
3) Press "TIME COOK" once, then press "1","0","0","0" to set the cooking time;
4) Press "POWER" once, then press "6" to select 60% microwave power.
5) Press "START/ +30 SEC." to start cooking.
12. ENQUIRING FUNCTION
1) In cooking state, press " CLOCK/KITCHEN TIMER ", the LED will display
clock for three seconds.
2) In the microwave cooking state, press " POWER " to enquire microwave
power level, and the current microwave power will be displayed. After
three seconds, the oven will turn back to the previous state. In multi-stage
state, the enquiring way can be done by the same way as above.
18
OPERATING INSTRUCTIONS
To Next Page
Loading...
