Kent Euroclean Rainmaker C User Manual

Electronic Service
Manuals
This electronic document is provided as a service to our custom-
ers. We do not create the contents of the information contained in
this document. Should you have detailed questions pertaining to
the information contained in this document, you may contact Michco,
or the manufacturer which provided the original information in this
electronic deliverable. Michco’s only part in this electronic deliver-
able was the electronic assembly process.
You may contact Michco through the following methods:
Phone (517) 484-9312 or (800) 331-3339 MI, OH, IN only
2011 N. High St. -- Lansing, Michigan -- 48906
Fax: (517) 484-9836
Email: CustServ@Michco.com
Web site: www.Michco.Com
Parts Web site: www.FloorMachineParts.Com
Order Parts on Line at:
www.FloorMachineParts.Com
Directly to Parts & Service:
By Email: Shop@Michco.com
By Fax: (517) 702-2041
By Voice: Use numbers above.
Serving the Cleaning Industry Since 1922
Notice: All copyrighted material remains property of original owners, all trademarks are property of respective
owners. Manuals are subject to Manufacturer’s reproduction limitations. Originals or reproductions were provided
by manufacturers through a request. We make no warranty as to the correctness of information provided in this
document and you assume all risk.

Kent Euroclean Rainmaker C Specifications

General

Brand	Kent Euroclean
Model	Rainmaker C
Category	Floor Machine
Language	English

Summary

Introduction

Parts and Service

Name Plate

Details the location and importance of the machine's model and serial number for service.

Uncrating

Instructions for inspecting the machine upon delivery and reporting any freight damage.

Important Safety Instructions

120VAC Grounding Instructions

Know Your Machine

Switch Plate Descriptions

Wiring Diagram

Operation

Ball Float Vacuum Shut-Off

Use and Maintenance

Maintenance Schedule

Provides a schedule for daily, monthly, and yearly maintenance tasks for the machine.

Part List Rainmaker™ C

Accessories

Lists optional accessories available for the Rainmaker™ C machine.

Technical Specifications

Vacuum Ball-Float System Troubleshooting

Vacuum Motor Not Running

Troubleshooting steps for when the vacuum motor fails to operate correctly.

Measuring AC Voltage Through Switch

Procedure to test the vacuum switch by measuring AC voltage using a voltmeter.

Testing Motor Directly to AC Voltage

AquaPro 300 Vacuum Ball-Float System Troubleshooting

AquaPro 300 Vacuum Motor Not Running

Troubleshooting steps for when the vacuum motor fails to operate correctly on AquaPro™ 300.

AquaPro 300 Measuring AC Voltage Through Switch

Procedure to test the vacuum switch by measuring AC voltage on AquaPro™ 300.

AquaPro 300 Testing Motor Directly to AC Voltage

Vacuum Motor Replacement

Vacuum Motor Installation

Low Vacuum Lift Pre-Troubleshooting

100 & 150 PSI Pump Adjustment