Do you have a question about the Kent-Moore J-44175-A and is the answer not in the manual?
Describes the Fuel Composition Tester J-44175-A and its purpose.
Details tester design, controls (Power), indicators (LEDs), and DMM connections.
Covers tester calibration and its non-suitability for diesel fuel.
Explains how to connect the DMM probes to the tester's terminals.
Covers powering on the tester and verifying the green diagnostic LED.
Details initial setup, air frequency test, and acetone frequency test procedures.
Provides context on E85 fuel, its properties, and potential contaminants like water or excessive ethanol.
Details obtaining two fuel samples, performing water/sediment test, and the E85 ethanol test.
Covers following specific GM service procedures and the steps for completing the test.
Covers acceptable ethanol ranges and quality issues like water, sediment, and excessive ethanol in normal gasoline.
Details obtaining fuel samples and performing tests for normal gasoline.
Covers following specific GM service procedures and test completion for normal gasoline.
Provides guidance for troubleshooting common tester issues, like failure to power up.
Explains causes and remedies for fuel contamination and red LED warnings based on frequency readings.
Provides contact information for technical support and lists parts for the fuel composition tester.
Details the terms, limitations, and exclusions of the product warranty for Kent-Moore Products.
Covers software warranty terms and procedures for product repair service.
Describes the Fuel Composition Tester J-44175-A and its purpose.
Details tester design, controls (Power), indicators (LEDs), and DMM connections.
Covers tester calibration and its non-suitability for diesel fuel.
Explains how to connect the DMM probes to the tester's terminals.
Covers powering on the tester and verifying the green diagnostic LED.
Details initial setup, air frequency test, and acetone frequency test procedures.
Provides context on E85 fuel, its properties, and potential contaminants like water or excessive ethanol.
Details obtaining two fuel samples, performing water/sediment test, and the E85 ethanol test.
Covers following specific GM service procedures and the steps for completing the test.
Covers acceptable ethanol ranges and quality issues like water, sediment, and excessive ethanol in normal gasoline.
Details obtaining fuel samples and performing tests for normal gasoline.
Covers following specific GM service procedures and test completion for normal gasoline.
Provides guidance for troubleshooting common tester issues, like failure to power up.
Explains causes and remedies for fuel contamination and red LED warnings based on frequency readings.
Provides contact information for technical support and lists parts for the fuel composition tester.
Details the terms, limitations, and exclusions of the product warranty for Kent-Moore Products.
Covers software warranty terms and procedures for product repair service.
| Brand | Kent-Moore |
|---|---|
| Model | J-44175-A |
| Category | Test Equipment |
| Language | English |
Loading...