EasyManua.ls Logo

KENT C4-100A User Manual

KENT C4-100A
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Maintenance & Repair Manual
Models: C4-100A, C4100LM & C4-
UPBLM Deep Cleaning Extractors
Question and Answer IconNeed help?

Do you have a question about the KENT C4-100A and is the answer not in the manual?

KENT C4-100A Specifications

General IconGeneral
CategoryScrubber
Warranty1 year
ModelC4-100A
Voltage220 V
Frequency50 Hz

Summary

Introduction

When the Machine is Delivered

Details on inspecting the machine upon its arrival and handling potential damage.

Before Operating the Machine

Essential guidance to read the manual for safe and proper machine operation.

Important Safety Instructions

General Instructions

Fundamental safety precautions for operating electrical appliances.

Grounding Instructions

Information on connecting the machine to a proper grounding outlet.

Cleaning Directions

Preparing Carpet & Upholstery

Steps to prepare the machine and area for carpet and upholstery cleaning.

Cleaning Upholstery

Specific instructions for cleaning upholstery using the machine's hand tool.

Cleaning Stairs

Guidance on safely cleaning stairs with the equipment.

Machine Operation Troubleshooting

Loss of Electrical Power

Steps to diagnose and fix issues where the machine has no power.

Loss of Vacuum / Little or No Suction

Troubleshooting steps for problems with the machine's suction capabilities.

Lack of Water Pressure

Solutions for issues related to insufficient water flow or spray pressure.

No Brush Movement

Identifying causes and solutions when the brush motor does not engage.

Warranty

Returning the C-4 to Rentable Condition

6 Month Inspection and Service

Service Warnings

Trouble Shooting Guide

Electrical System

Common electrical faults and their corresponding repair actions.

Vacuum System

Pump System

Brush System

Repair Manual

Remove the Vacuum and Brush Assemblies

Step-by-step guide to safely detach vacuum and brush components.

Replace the Vacuum Motor

Instructions for replacing the vacuum motor unit in the machine.

Replacing the Brush Motor

Process for installing a new brush motor and related parts.

Replacing the Pump Motor

Detailed guide for replacing the pump motor assembly.

Removing the Brush Assembly

Steps to properly remove the entire brush assembly.

Servicing and Rebuilding the Brush Assembly

How to maintain and repair the brush assembly for optimal performance.

Replacing the Front Nozzle Clip

Instructions for replacing the front nozzle clip component.

Replacing the Rear Nozzle Clip

Steps for replacing the rear nozzle clip component.

Replacing the Trigger Switch

Guide for swapping out the trigger switch for a new one.

Replacing the Rocker Switch Assembly

Procedure for replacing the rocker switch and its associated parts.

Replacing Terminals

How to replace electrical terminals that may be damaged or worn.

Wiring Lever Nuts

Proper method for connecting wires using lever nuts.

Coupler Repair

Steps to repair the machine's coupler for leaks or functionality issues.

Replacing Drain Tube

Instructions for replacing the drain tube assembly.

Testing Lid

Procedure to test the lid's seal and function for proper operation.

C4-A Maintenance & Repair Manual Test