INSTALLATION & OPERATING
INSTRUCTIONS
Clean Air Freestanding Wood Fires
CONTENTS
General Information ................1
Testing & Approvals..................2
Installation.............................2-5
Operation..........................6-7
Maintenance........................8
Replacement Parts.............9-10
Warranty...............................11
1. This re must be installed by an approved installer, ideally registered with the New
Zealand Home Heating Association. Do not allow any makeshift or compromising
installation methods as this could result in a house re. This Kent freestanding wood
re must be installed according to these instructions.
2. A Building Consent from the Local Authority must be obtained before installing
this wood re, and we suggest that the Insurance Company covering building
insurance be advised of the installation.
3. This Kent freestanding wood re, when installed according to these instructions,
complies with the provisions of AS/NZS 2918-2001 “Installation of Domestic Solid Fuel
Burning Appliances”.
4. The clearances given in these instructions are necessary to prevent overheating
of nearby combustibles and drying out of the house structure. They may not be
reduced without authorisation.
5. There must be a clearance of at least 1 metre between the front of this Kent
freestanding wood re and any building structure or other substantial immovable
object in front of the wood re.
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Important: the installer or seller must leave these instructions with the purchaser
GENERAL INFORMATION
To Next Page
Need help?
General
