1
KENT proudly presents
- its new and advanced
domestic water purifier based on the
patented KENT Technology. The ground-
breaking KENT Technology, developed at
KENT laboratory, broadly comprises of
state-of-the-art RO+UF+UV with TDS
Control & Auto - Flushing System. The
initial purification by RO membrane
having porosity as fine as 0.0001 microns
reduces even dissolved impurities (hard
salts, heavy metals etc.). Double
purification by UV process ensures
complete protection against bacteria and
viruses. Moreover, the patented TDS
Control System intelligently retains
essential natural minerals in purified water,
thus taking total care of your health and
well being.
KENT PEARL
TM
Mineral RO
KENT TECHNOLOGY - A Breakthrough in
Water Purification*
TM
Salient Features of KENT Pearl Mineral RO Water Purifier
n n
n
n
n n
n n
n n
n
n
n n
Suitable for wall mounting or counter-top 8 Litres storage capacity
installation
RO Membrane fused inside membrane
Purification by RO+UF+UV with TDS Control housing to prevent tampering
Inbuilt Auto-flushing System Vertically mounted SMPS for protection
Detachable tank for easy on-site cleaning on Push-fit components for leak-proof &
regular basis maintenance-free performance
LED indicator for power and purification display Fully automatic operation with auto-on
and auto-off function
Computer-controlled operation with Filter
Change Alarm* and UV Fail Alarm* ABS construction for corrosion-free lifespan
Adjustable TDS Control System to allow TDS Suitable for Purification of Brackish /
adjustment of purified water Tap Water / Municipal Corporation Water
1.
2.
3.
4.
5.
6.
7.
Water Purifier : 01 No.
3-Way Connector : 01 No.
S.S. Ball Valve : 01 No.
Food Grade Pipe (Blue)- 1/4 inch. : 2.5 meters
Food Grade Pipe (White)- 3/8 inch. : 2.5 meters
Screws & Plastic Inserts : 02 Nos. each
Instruction Manual : 01 No.
Sticker Center Drill : 01 No.
TM
KENT Pearl Mineral RO
8.
Items in the Box
2
* Tested & Certified by TUV-SUD South Asia (P) Ltd.
Avoid exposure to direct
sunlight and installation
in damp areas.
Make sure that th e
purifier is connected to
normal temperatur e
water supply only.
Rejected Water
Drain
10 M
Water Source
Water in
Maximum distance between the
water source and purifier should
not be more than 3 meters.
Avoid sharp bends in pipe.
Do not block the reject
water pipe.
Do not confine the
purifier in a cabinet.
In case the purifier is not to
be used for more than two
days, kindly switch off the
power supply and drain the
storage tank.
Do not try to service the purifier on your own.
Instead, call the service technician for help.
To keep the storage tank clean, it should be removed,
cleaned and wiped dry, once in 15 days.
Important Instructions
Make sure that the rejected
water pipe is not placed at a level
higher from the purifier,
otherwise rejected water may
flow backwards into the purifier.
Use Genuine Kent spares for optimum performance
To Next Page
Loading...
Need help?
General
