5
TROUBLESHOOTING
TECHNICAL SPECIFICATIONS
Product Name
KENT STAR INDUCTION COOKTOP
Product Code 116137
Net Weight 2.9 kg
Input Power Supply Single Phase 230 V AC, 50 Hz, Class 1
IP Rating IPXO
Total Power Consumption 3000 W
Temperature Adjustment 80˚C - 200˚C
Product Dimensions (mm) 290 (L) x 75 (W) x 370 (H)
Note : If fan connection is out, machine will get cut off within 3 mins.
TROUBLE CODE POSSIBLE CAUSE SOLUTION POSSIBLE
E1
Plate surface temperature sensor
is not connected well, or short-
circuited.
Please restart (OFF/ON) the unit
once. If the error still exists, please
contact the qualified service centre.
E2
The Heat sensor of radiator (IGBT)
is not connected well, or short-
circuited.
Please restart (OFF/ON) the unit
once. If the error still exists, please
contact the qualified service centre.
E3
Supply voltage is too high(more than
275V).
Check power supply. Power on after
power supply is back to normal.
E4
Supply voltage is too low (less than
85V).
Check power supply. Power on after
power supply is back to normal.
E5
The temperature of plate surface is
too high.
Please wait for a few minutes until
the unit cools down.
E7 Loose connection of the coil
Please contact the qualified service
centre.
E8
There is no pot/pan or unsuitable
pot/pan on induction cooker.
Change the suitable pot/pan, or con-
tact the qualified service centre.
To Next Page
Loading...