To Next PageTo Next PageWhat to do if no steam comes out of my Kenwood Ariete SC 7.30?
If no steam is coming out of the nozzle of your Kenwood Steam Cleaner, it could be due to a cold boiler tank. In this case, wait for the steam ready light to turn on. Alternatively, the water tank might be empty or not correctly inserted. Refill the water tank and ensure it is properly positioned.
Why is my Kenwood Steam Cleaner dispensing little steam?
If your Kenwood Steam Cleaner nozzle is dispensing only a little steam, it might be because the steam regulation dial is set to the minimum. Adjust the steam dispensing accordingly. Another reason could be a cold boiler tank; wait for the steam ready light to illuminate.
What to do if my Kenwood Steam Cleaner is not dispensing detergent?
If no detergent is being dispensed from the nozzle of your Kenwood Steam Cleaner, and it's the first time you're using it, follow the procedures described in the instructions for use. Otherwise, check if the detergent reservoir is empty and fill it.
General| Brand | Kenwood |
|---|---|
| Model | Ariete SC 7.30 |
| Category | Steam Cleaner |
| Language | English |
Instructions for filling the boiler tank with water before operating the appliance.
Steps to turn on the steam cleaner and indicators for readiness.
How to use the steam cleaner, including steam dispensing and locking.
Procedures for safely turning off and storing the steam cleaner.
Procedures for cleaning the boiler tank to remove scale residues and maintain performance.
