What to do if my Kenwood Food Processor stops during operation?
If your Kenwood Food Processor stops during operation, it might be due to overload protection or an activated overheat system because the maximum capacity was exceeded. To resolve this, switch off and unplug the appliance. Check for any obstructions or overloading. Allow the food processor to stand for 30 minutes before plugging it back in and restarting.
Why my Kenwood Food Processor does not work?
If your Kenwood Food Processor does not operate, first, check that the appliance is properly plugged into a power source. Also, ensure that the chopper lid is correctly interlocked. Finally, make sure that the grinding mill attachment is also correctly interlocked.
Why is my Kenwood Food Processor slowing down?
If your Kenwood Food Processor starts to slow down or labour during processing, it may be because you have exceeded the recommended quantity. Refer to the processing guide for recommended quantities. Also, when processing heavy loads with the chopper, do not operate continuously for longer than 15 seconds; let it cool for 2 minutes between each 15-second operation. For the grinding mill, refer to the recommended processing guide for operation times.
How to grind turmeric with Kenwood Food Processor?
For optimal results when grinding dried turmeric with your Kenwood Food Processor, process a minimum of 25g of additional ingredients, such as dried herbs and spices. Use the pulse speed to initially break up the ingredients, followed by a continuous speed. Also, refer to the recommended usage chart.
What to do if plastic parts discoloured in Kenwood Food Processor?
Some foods may cause discolouration of the plastic parts of your Kenwood Food Processor. To remove this discolouration, rub the affected area with a cloth dipped in vegetable oil.
Key operational notes for the chopper bowl, including interlocking and capacity.
Crucial guidelines for grinding mill operation, including turmeric processing.
Tips for maximizing flavour and achieving best results with the grinding mill.
Recipe for making mayonnaise using the appliance.
Recipe for creating a spice blend with the grinding mill.
Recipe for making prune marinade with the appliance.
General| Brand | Kenwood |
|---|---|
| Model | CHP80 |
| Category | Kitchen Appliances |
| Language | English |
To Next Page