To Next PageTo Next Page
Need help?Do you have a question about the Kenwood CMOS-320 and is the answer not in the manual?
Camera Specifications| sensor type | 1/3.6-inch color CMOS sensor |
|---|---|
| number of pixels | Approx. 330, 000 pixels |
| lens focal length | f=1.05 mm |
| lens F value | F value 2.0 |
| horizontal angle of view | Approx. 195° |
| vertical angle of view | Approx. 145° |
| illumination range | Approx. 0.9 to 100, 000 lux |
Video Output| video output level | 1.0 Vp-p |
|---|---|
| video output impedance | 75Ω |
| scanning system | Interlace |
Power| operating voltage | 14.4V (9.0 V – 16.0 V) |
|---|---|
| max current consumption | 100 mA |
Weight and Dimensions| dimensions | 23.4 x 23.4 x 26.1 mm |
|---|---|
| weight | Approx. 23 g (without cable) |
Camera Specifications| sensor type | 1/3.6-inch color CMOS sensor |
|---|---|
| number of pixels | Approx. 330, 000 pixels |
| lens focal length | f=1.12 mm |
| lens F value | F value 2.2 |
| horizontal angle of view | Approx. 128° |
| vertical angle of view | Approx. 103° |
| illumination range | Approx. 0.9 to 100, 000 lux |
Video Output| video output level | 1.0 Vp-p |
|---|---|
| video output impedance | 75Ω |
| scanning system | Interlace |
Power| operating voltage | 14.4V (9.0 V – 16.0 V) |
|---|---|
| max current consumption | 50 mA |
Weight and Dimensions| dimensions | 23.4 x 23.4 x 23.9 mm |
|---|---|
| weight | Approx. 22 g (without cable) |
Guidance on optimal placement for rear and front camera installations.
Steps for mounting the camera and adjusting its viewing angle for optimal performance.
Instructions for installing the switch unit specifically for the CMOS-320 model.
Outlines the fundamental wiring and connection steps for the camera system.
Details on connecting the camera system, including multi-camera setups.
How to operate the switch unit for display modes, guidelines, and adjustments.
Pre-setting procedures, including vehicle positioning and safety checks.
Step-by-step guide to configuring camera settings and adjustments.
Adjusting camera centering for overhead view to align with vehicle lines.
Adjusting horizontal angle for overhead view to ensure proper alignment.
Adjusting vertical angle for overhead view to ensure proper alignment.
Adjusting the overall size of guidelines in the wide view.
Adjusting left-right positioning of guidelines in the wide view.
Setting the red line position for parking reference in the wide view.
Assigning a unique ID to the front camera for multi-camera setups.
Finalizing camera settings and completing the setup process.
Technical specifications for the CMOS-320 camera unit.
Technical specifications for the CMOS-220 camera unit.
Technical specifications for the CMOS-320 switch unit.
General operating voltage, current consumption, and product notes.
